home *** CD-ROM | disk | FTP | other *** search
- !Specify the defaults for the program
- !b - backup log output to the printer. [ALL]
- !P - rig's power output. Only used on the QSL card.
- !p - the power output multiplier - default is 10
- ! This is used by the Field Day and QRP contest programs.
- ! You MUST have this set correctly before you run any reports.
- !s - the power source bonus - default is 1.5 (battery) [QRP only]
- !t - timezone in the format [-]hh[:mm][D]
- ! Timezones WEST of Greenwich are POSITIVE numbers. So, the optional
- ! minus sign is used to indicate EAST of Greenwich.
- ! The optional minutes [:mm] allows setting the timezone to
- ! After the time, an optional letter 'D' indicates daylight savings
- ! time is used in this zone.
- ! Thus, the time you specify with hh:mm is your local STANDARD timezone
- ! used during the winter.
- ! Once set this need not be changed as the program will adjust for
- ! DST if necessary. BUT the user must always ensure that the AMIGA
- ! clock is running on LOCAL TIME (i.e. on 1st Sunday in April and last
- ! Sunday in October, you must adjust your clock.
- ! Alternatively, you can set the environment variable TZ_CHU in your
- ! s:startup-sequence file as follows:
- ! setenv TZ_CHU [-]hh[:mm][D]
- ! If the timezone is specified in this file then it overrides the
- ! environment variable. If neither are specified then the program
- ! prints an error message and terminates.
- ! [ALL]
- !f - forces program to use specified frequency and mode, NOT the frequency
- ! or mode of the the radio.
- ! If this command is used the serial port is not opened.
- ! This value defaults to zero and when set to zero the
- ! value on the radio is used.
- ! Setting this to a non-zero value allows you to enter a previously
- ! recorded log (thus, the frequency on the radio is irrelevant).
- ! [ALL]
- !l - Sets morse code memory. e.g. l N string ... sets memory N
- ! to the specified string
- !
- ! The string may contain abbreviations for commonly used strings.
- ! %C Replaced by the users callsign as given by the 'c' command (below)
- ! %c Replaced by the callsign typed in the beginning of the data entry
- ! line
- ! %N Replaced by the current QSO number.
- ! [ALL]
- !m - sets morse code speed. e.g. m 40 sets it to 40wpm.
- !
- !k - sets keyer type.
- ! 0 = Iambic Curtis B with dot/dash memory (DEFAULT)
- ! 1 = Iambic Curtis A with dot/dash memory
- ! 2 = bug. Automatic dots. Manual dash.
- !c - set your callsign.
- !e - set field day or sweepstakes exchange. MUST contain correct abbrev for
- ! your section e.g. for fd "e 1e SK" for ss "Q VE5VA 82 SK" note that
- ! you don't put any sequence number in the ss exchange.
- ! This field is used by the reporting program to put your exchange on the
- ! log sheets.
- !
- c ve5va
- p 5
- e q ve5va 82 sk
- l 1 tu nr %n q %C 82 sk "
- l 4 ve5va
- l 5 de ve5va ve5va k
- l 6 agn?
- l 7 nr?
- l 8 ck?
- l 10 cq ss cq ss de ve5va ve5va k
- m 0
- k 0
- P 5W
- f 14020 cw
- ;b
- a 0
-
